The Fruit Juice Hot Filling Machine comes in two variants: the Wash-filling-capping 3-in-1 unit and the washing-fruit pulps filling-liquid juice filling-capping 4-in-1 machine. These machines are specifically designed for the production of glass or PET bottled drinking juice.
The RXGF Wash-filling-capping 3-in-1 unit is a cutting-edge piece of juice machinery that can execute the entire production process, which includes bottle washing, filling, and sealing. By significantly reducing the contact time between materials and external elements, it not only improves sanitary conditions but also enhances production capacity and economic efficiency.
Main features :
1. Washing Part
Except the down framework, the transmission parts and some parts that must be made of special materials. Other parts are all made of stainless steel 304.
The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and plastic is made of UMPE.
The gripper is made of stainless steel, the position where hold the bottleneck is made of food standard rubber;
Rinsing time can be guaranteed for 4 seconds.
2. Filling part
The entire filler is micro negative pressure filling system .Unique re-flux design saves cost, convenient for external CIP (clean in place)cleaning system.
High accurate SUS304L construction filling nozzle, make sure high accurate filling level SUS304L liquid bowl, pipeline system .
Filling level adjustable by choosing different silicone gasket (quick change over parts) No bottles, no filling .
Butterfly type liquid bowl, with automatic water level controller.
The hot filling temperature 85-90 degrees, if the temperature is low than the setting value, the filling valves will stop and return the last beverage in filling valve to recycle tank and return to UHT again to sterilize with pump.
3. Capping part:
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Use waterfall or centrifugal cap cover machine.
| Project Name:Fruit Juice Hot Filling Machine | ||||||
| Model | RXGF 14-12-5 | RXGF 16-16-5 | RXGF 24-24-8 | RXGF 32-32-8 | RXGF 40-40-10 | RXGF 50-50-12 |
| Washing Nos | 14 | 16 | 24 | 32 | 40 | 50 |
| Filling Nos | 12 | 16 | 24 | 32 | 40 | 50 |
| Capping Nos | 5 | 5 | 8 | 8 | 10 | 12 |
| Capacity(BPH) | 3500 | 5000
| 8000 | 12000 | 15000 | 18000 |
| Suitable bottle | Glass bottle and PET bottle | |||||
| Bottle Volume | 150ml to 2.5Ltr (Customized) | |||||
| Bottle diameter(mm) | Dia50-Dia115 | |||||
| Bottle height | 160-320mm | |||||
| Compress air pressure(Mpa) | 0.3-0.4 | |||||
| Washing medium | Aspetic water | |||||
| Rinsing pressure(Mpa) | >0.06 <0.2 | |||||
| Filling temperature (℃） | 85～90℃ | |||||
| Filling theory | Micro negative pressure filling | |||||
| Application | Fruit juice hot filling machine | |||||
| Total powder | 2KW | 2.2KW | 3KW | 4KW | 7.5KW | 7.5KW |
| Measurement (mm) | 2360*1770*2700 | 2760*2060*2700 | 2800*2330*2700 | 4215*2960*2700 | 4360*3300*2700 | 5900*3300*2700 |
| Weight | 3200kg | 4000kg | 4500kg | 6500kg | 8000kg | 9500kg |
No production lines found.
Français 
Español 
Português 
العربية 